The Common Core in Montana

$Montana flag$

Skills available for Montana fourth-grade math standards

Standards are in black and IXL math skills are in dark green. Hold your mouse over the name of a skill to view a sample question. Click on the name of a skill to practice that skill.

Show alignments for:

Montana Content Standards: Grade 4 Montana Content Standards: Grade 4
Montana Common Core Standards: Grade 4 Montana Common Core Standards: Grade 4
Montana Common Core Standards: Mathematical Practices Montana Common Core Standards: Mathematical Practices

Actions

Print standards

MT.4.G Geometry

MT.4.G.1 Draw points, lines, line segments, rays, angles (right, acute, obtuse), and perpendicular and parallel lines and identify these in two-dimensional figures.
MT.4.G.2 Classify two-dimensional figures based on the presence or absence of parallel or perpendicular lines or the presence or absence of angles of a specified size, recognize right triangles as a category, and identify right triangles.
MT.4.G.3 Recognize a line of symmetry for a two-dimensional figure as a line across the figure such that the figure can be folded along the line into matching parts, identify line-symmetric figures, and draw lines of symmetry. This standard should incorporate designs and cultural context relating to Montana Indigenous Peoples and local communities.

The Common Core in Montana

Show alignments for:

Actions

MT.4.OA Operations and Algebraic Thinking

MT.4.OA.1 Interpret a multiplication equation as a multiplicative comparison, and represent verbal statements of multiplicative comparisons as multiplication equations.

MT.4.OA.2 Multiply or divide to solve problems in context that involve multiplicative comparison and distinguish multiplicative comparison from additive comparison.

MT.4.OA.5 Analyze a number or shape pattern that follows a given rule, identify and explain informally features of the pattern that were not explicit in the rule itself, generate terms in the resulting sequence, and observe the pattern.

MT.4.NBT Number and Operations in Base Ten

MT.4.NBT.1 Recognize that in a multi-digit whole number, each place represents ten times the place to its right.

MT.4.NBT.2 Read and write multi-digit whole numbers using standard form, word form, and expanded form and compare two multi-digit numbers based on the value of the digits in each place using >, =, and < symbols.

MT.4.NBT.3 Use place value understanding to round multi-digit whole numbers to any place.

MT.4.NBT.4 Accurately and efficiently add and subtract multi-digit whole numbers using the standard algorithm.

MT.4.NF Number and Operations — Fractions

MT.4.NF.1 Explain why a fraction a/b is equivalent to a fraction (n × a)/(n × b) by using visual fraction models and use this principle to recognize and generate equivalent fractions.

MT.4.NF.3 Understand a fraction a/b with a > 1 as a sum of fractions 1/b by:

MT.4.NF.3.a Understanding addition and subtraction of fractions as joining and separating parts referring to the same whole.

MT.4.NF.3.b Decomposing a fraction into a sum of fractions with the same denominator in more than one way, recording each decomposition by an equation.

MT.4.NF.3.c Adding and subtracting mixed numbers with like denominators by replacing each mixed number with an equivalent improper fraction or other efficient strategies.

MT.4.NF.3.d Solving problems in context that involve addition and subtraction of fractions referring to the same whole or having like denominators. This standard should incorporate cultural context relating to Montana Indigenous Peoples and local communities.

MT.4.NF.4 Apply and extend previous understandings of multiplication to multiply a fraction by a whole number by:

MT.4.NF.4.a Understanding a fraction a/b as a multiple of 1/b and recording the conclusion by the equation a/b = a · (1/b).

MT.4.NF.4.b Understanding a multiple of a/b as a multiple of 1/b, using this to multiply a fraction by a whole number and recognizing n × (a/b) = (n × a)/b).

MT.4.NF.4.c Solving problems in context involving multiplication of a fraction by a whole number. This standard should incorporate cultural context relating to Montana Indigenous Peoples and local communities.

MT.4.NF.5 Express a fraction with denominator 10 as an equivalent fraction with denominator 100, and use this technique to add two fractions with respective denominators 10 and 100.

MT.4.NF.6 Use decimal notation for fractions with denominators 10 or 100.

MT.4.NF.7 Compare two decimals to hundredths by reasoning about their size, recognize that comparisons are valid only when the two decimals refer to the same whole, record the results of comparisons with the symbols >, =, or <, and justify the conclusions.

MT.4.MD Measurement and Data

MT.4.MD.1 Know relative sizes of units within one system of measurement and within the system, express measurements of a larger unit in terms of a smaller unit.

MT.4.MD.3 Apply the area and perimeter formulas for rectangles including problems in context.

MT.4.MD.4 Make a line plot to display a data set of measurements in fractions of a unit and solve problems involving addition and subtraction of fractions by using information presented in line plots.

MT.4.MD.5 Recognize angles as geometric shapes that are formed wherever two rays share a common endpoint and understand concepts of angle measurement by:

MT.4.MD.5.a Understanding that an angle is formed by two rays with a common endpoint at the center of a circle that measures a total of 360 degrees, and a single-degree unit measure is equal to 1/360 of the circle.

MT.4.MD.5.b Understanding that an angle that turns through n one-degree angles is said to have an angle measure of n degrees.

MT.4.MD.6 Measure angles in whole-number degrees using a protractor and sketch angles of specified measure.

MT.4.MD.7 Recognize angle measure as additive. When an angle is decomposed into nonoverlapping parts, the angle measure of the whole is the sum of the angle measures of the parts. Solve addition and subtraction problems to find unknown angles on a diagram including problems in context.

MT.4.G Geometry

MT.4.G.1 Draw points, lines, line segments, rays, angles (right, acute, obtuse), and perpendicular and parallel lines and identify these in two-dimensional figures.

MT.4.G.2 Classify two-dimensional figures based on the presence or absence of parallel or perpendicular lines or the presence or absence of angles of a specified size, recognize right triangles as a category, and identify right triangles.

MT.4.NF.1 Explain why a fraction ^a/_b is equivalent to a fraction ^{(n × a)}/_{(n × b)} by using visual fraction models and use this principle to recognize and generate equivalent fractions.

MT.4.NF.3 Understand a fraction ^a/_b with a > 1 as a sum of fractions ¹/_b by:

MT.4.NF.4.a Understanding a fraction ^a/_b as a multiple of ¹/_b and recording the conclusion by the equation ^a/_b = a · (¹/_b).

MT.4.NF.4.b Understanding a multiple of ^a/_b as a multiple of ¹/_b, using this to multiply a fraction by a whole number and recognizing n × (^a/_b) = ^{(n × a)}/_b).

MT.4.MD.5.a Understanding that an angle is formed by two rays with a common endpoint at the center of a circle that measures a total of 360 degrees, and a single-degree unit measure is equal to ¹/₃₆₀ of the circle.